gildan tshirt

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

I ordered these shirts to heat press HTV on them to give as gifts. These shirts are SO soft. They hold up well in the wash and the quality is great. I'll order these again and again!

These have a unisex fit, similar to a traditional men's shirt. For a fitted look, I recommend ordering a size down!

XS (0-4)
Small (4-6)
Medium (6-10)
Large (10-14)
XL (14-18)

Love these for HTV! Made some mama bear ones and they are a huge hit!

Alright this will be a long review but extremely helpful here we go. First off I bought the white, Light gray, cardinal, cool blue, black, graphic black, and military green all of these did match the pictures except light gray that one was a lot lighter it looks more like your t shirt is dirty in my opinion. And the graphic black looks more like a really dark gray didn't care for that one either. Ok softness nice and soft love it. fit was perfect. shrinkage they hardly if any shrunk at all. They also hold up well with vinyl on them. Ok now I'm going to compare them to the shirts I previously bought. HANES 5170 compared to Next level 3600- Next level 3600 are by far better they are way softer and shape is way nicer. Gildan G640 compared to Next level 3600- the softness is the same, the thickness Gildan is a bit thicker, the shape they are the same, the colors are fairly the same. The reason I chose next level though is because Gildan was shrinking a lot I'm talking a good 1 1/2 - 2 inches of shrinkage, but my sister likes Gildan better and says hers don't shrink IDK. Lastly Next level 3600 compared to Bella canvas 3001 CVC- I love them both softness the same, shrinkage the same they hardly shrink, the only difference is fit I buy the next level for men they are more loose fitting I buy the bella's for women they are more fitted so they are tighter on men but loose enough on women. I hope this helps someone.

I ordered these just for personal use. I just wanted some plain t-shirts in different colors that were inexpensive, but comfortable and flattering. These work perfectly. I wear one of them almost every day around the house, with my pajama pants or yoga pants. They also are great for wearing under hoodies in this cold weather that we are currently having. I would also wear them with a pair of jeans, running errands, etc. They are very comfortable and soft and I'm very happy with this purchase! The sizing on the unisex shirts is not as small as the women's style, so I could wear a medium in this, and it fits perfectly. It is not oversized or loose, but it is not too tight either. I am 5'6" and approximately 130 lb. If you're large chested, which I'm not, then you'd want to probably size up a little bit. I think I could go with a large, if I wanted a little more of a loose fit. And I may try large next time. I would say a man would probably want to order a size up, unless you like the fitted look. I haven't noticed any shrinking, which is awesome! I do put them in the dryer, but on low heat, and they come out well! 👍🏼

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

Great T. Very soft and holds size wash after wash. Crew neck keeps shape and stays flat.

Great fit for both guys and gals. I typically refer to these as a "boyfriend" fit for ladies who are looking for a more relaxed fit and a longer length. I am 5'0" and I love the fit of these tees. I don't find them to be too long after a single wash & dry. Not too snug for men. Colors are great after several washes and screen prints/heat transfers well.

great for sublimation

I use these tee's for HTV and they work perfectly and look fantastic. The softness and quality of the tee combined really can't be matched. I also found that the Bella Canvas 3001c is very comparable to these and a few dollars less.

Soft, durable and takes HTV well. what more could you want?

My customers and I LOVE the quality of these shirts. They're thin, but not see through. Super soft and comfortable. HTV adheres to them perfectly! Have ordered in four colors (black, white, heather gray and midnight navy) and all have exceeded expectations.

I have placed many orders with Jiffy and they're always super fast with their deliveries. Many come in the next day while others are no more than a day or two after. Their shirts are a little more expensive than other wholesale companies, but with only needing to have a cart of $49 or more to get free shipping; it makes up for it. They keep me coming back!!

These shirts are the only ones I'll buy for screen printing. They are thin without being see-through, and so soft and comfy. Feels just like a much more expensive American Apparel shirt.

I discovered the Next Level 3600 from a shirt I bought at a concert. Unlike most concert tees, this shirt fit well and remained the same shape/size after multiple washings, so I purchased 15 plain ones from Jiffy.com that I wear daily to work. I'm 6'5" and a lanky 220Lbs, so its hard to find a tshirt that is both long enough for my torso but still fitted in the waist/arms so it doesnt look like I'm wearing a tent. The XL fits this build perfectly.

While I do love the softness of the Bella Canvas and the size seems to run true, the sleeves arnt always consistant. Sometimes the sleeve is very comfortable and sometimes its a tight fit -- same size shirts.

I keep buying them bc they hold up well wash after wash after wash, my only gripe is the sleeve, sometimes perfect other times kinda tight.

My fave part about the Bella Canvas is not only the softness but they are thin. I live in Texas, its hot here, the thinner the better.

This is by far my FAVORITE tee. It’s so so soft, and wears so well, takes HTV and Sublimations SO well!

These Bella canvas shirts are the best!!! My favorite to use when adding sublimation and HTV. They are a customer favorite as well!

These tees are amazingly soft and comfortable. My only complaint is how thin they are, so make sure you don't size down unless you like to layer. I also say the sizing runs very similar to US women's sizing vs Unisex. There's no way my husband would be able to wear his normal size in this.

These unisex tees are super comfy! I use them for the majority of my heat transfer projects and people love the feel of them and the quality. They are definitely worth the couple of extra dollars to upgrade from a basic cotton tee shirt. For women I suggest their usual size or possibly a size down if you prefer a snugger fit. For men, I might suggest going up one if you like a looser fit.