Blank Safety for Sublimation Apparel

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

My customers love these!
I print using dye sublimation which requires 100% polyester for the best print. Polyester shirts come in two finishes and when my customers want the feel of cotton shirts, these are perfect!
I have not had a single complaint from a customer with these. And happy customers are what it's all about.

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

Love these for sublimation! I normally use the bella + canvas marble ones and while those are softer these are still great quality! They are not as see through and they hold the sublimation wonderfully! My customers loved them, will be buying again!

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

OMGOODNESS! This was my 1st sub product of this magnitude and it turned out amazing. I have to remember to size down one size for the ladies next time, but other then that is was a hit.

I bought these to sublimate on. Every color fits just a tad bigger, but I would not size down if you like a loose fit. The athletic gray and light blue subs extremely well. I would not recommend subbing on the red, charcoal and California blue. The heat is too high for them and they tend to scorch. I turned the heat temp. down and it still scorched them and the image was faded.

great for sublimation

Sizing. Needs to be in measurements so the label size can be ignored. I have 36 inch arms, 6 foot 2 inches tall, a 34 inch waist and weigh. 185 lbs Ordered 2XL for sleeve length. Big enough for two of me. Sleeves were good. Sent back, no problem. Ordered XL, better but not quite . Kept these and ordered LARGE. Received these and PERFECT! ! ACTUAL measurements should be included in description to avoid this.Love the shirts, lite, airy, looks good etc. The lower arms get sunburned easily and need to be protected, the long arms do this well.

These are now my go to brand for long sleeves. CANT EXPRESS HOW MUCH I LOVE THEM! I use them often with the sublimation process. The colors are very vibrant when subbing because they are 100% poly. But, the best thing is... they don’t feel like pure poly.

loved the shirt used it for sublimation worked awesome and holds up great

I purchased the white A4 performance shirt to make jerseys for a friend who is a coach of a basketball team. They were on a limited budget and I offered to take a shot at making them some. These shirts were exactly what we needed. They took the Siser HTV well at 290 degrees with no burn marks. The shirts have held up well and look great.

I love these shirts for sublimation. The fabric accepts the dye well and colors turn out well. I prefer a thinner softer tee and these fit the bill.

I bought these shirts for my husband's work softball league. I put htv on them and they held up pretty well! They love the fit and they're very soft.

I bought these shirts for a group that was running the Spartan Race. Overall I loved the quality and feel of the shirts. Iheat pressed them with heat transfer vinyl and it took wonderfully, I however had to press the entire shirt as the heat discolored it where I pressed so it created a litttle bit more work.

I made these shirts for a basketball team that I sponsored this year and they are perfect for their shooting shirts. I used the silver color and was able to sublimate on them very easily.

I used these shirts for my sons basketball teams warm up shirts. I used Thermoflex plus HTV at 325 for 15 seconds which worked well with the polyester fabric. . I took the carrier sheet off and pressed again for another 15 seconds. I had a very slight heat press mark but that seemed to disappear once washed. I found the shirts to run a bit big so I just sized down one for each player.

We owe a print shop and these shirts are the best to work with either with sublimation or heat transfer. We are happy with them as are the customers. Very durable comfortable.

I ordered these shirts for a contractor customer. We applied his logo and he distributed the shirts among his crew. A few days after he picked up the shirts he stopped by to tell me that his crew members love the shirts. They are working all day outside and the shirts keep them nice and cool, they pull the sweat away from their skin and don't cling, No ugly sweat stains and very easy to get the dirt out during wash. A winner on all fronts!

I did HTV on these long-sleeve shirts for a high school basketball team. They loved how they looked and how they feel as well. Great shirt.