Blank Pink for Sublimation Apparel

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

I use these shirts for Heat Transfer&apos;s and sell them. I love these tanks, I use them focusing on workout tanktops. They are lightweight and flowy. I love that they are a little longer so when I wear my tight workout pants, the shirt goes down over my butt and i feel comfortable that I am covered. (hope that helps)<br /><br />being (36D) I wear a large, I could probably go up a size to XL and be more comfortable.

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

Sublimation

Oh my gosh!! If you're looking for a SUPER soft, not tight in the mid section, thin but big too thin, flattering tank....thus should be your go-to! Sure, it's pricier than some but I would but this (and do) over any other tank! The sizing is true & could probably size 1 down too. I normally wear a large & the medium is perfect.

great for sublimation

Sizing. Needs to be in measurements so the label size can be ignored. I have 36 inch arms, 6 foot 2 inches tall, a 34 inch waist and weigh. 185 lbs Ordered 2XL for sleeve length. Big enough for two of me. Sleeves were good. Sent back, no problem. Ordered XL, better but not quite . Kept these and ordered LARGE. Received these and PERFECT! ! ACTUAL measurements should be included in description to avoid this.Love the shirts, lite, airy, looks good etc. The lower arms get sunburned easily and need to be protected, the long arms do this well.

I use the Port and Co 100%poly shirts for my small business. My customers love these shirts, because they are soft and breathable ...I love them because they are easy to sub on, the ink absorption is amazing. Im in several sublimation groups and I always recommend Jiffy for subbing. Shipping is A-1!

loved the shirt used it for sublimation worked awesome and holds up great

Perfect shirt if you are looking for a slippery polyester activewear shirt. Does not shrink, keep moisture away. And worked really with vinyl application.

These shirts are excellent for screen printing. They hold up well in the wash, they keep their size & shape. The fit is great for a lot of different body types.

I purchased the white A4 performance shirt to make jerseys for a friend who is a coach of a basketball team. They were on a limited budget and I offered to take a shot at making them some. These shirts were exactly what we needed. They took the Siser HTV well at 290 degrees with no burn marks. The shirts have held up well and look great.

I bought these shirts for my husband's work softball league. I put htv on them and they held up pretty well! They love the fit and they're very soft.

I bought these shirts for a group that was running the Spartan Race. Overall I loved the quality and feel of the shirts. Iheat pressed them with heat transfer vinyl and it took wonderfully, I however had to press the entire shirt as the heat discolored it where I pressed so it created a litttle bit more work.

I made these shirts for a basketball team that I sponsored this year and they are perfect for their shooting shirts. I used the silver color and was able to sublimate on them very easily.

I used these shirts for my sons basketball teams warm up shirts. I used Thermoflex plus HTV at 325 for 15 seconds which worked well with the polyester fabric. . I took the carrier sheet off and pressed again for another 15 seconds. I had a very slight heat press mark but that seemed to disappear once washed. I found the shirts to run a bit big so I just sized down one for each player.

We owe a print shop and these shirts are the best to work with either with sublimation or heat transfer. We are happy with them as are the customers. Very durable comfortable.

I typically wear a 1x in women's and this shirt fit me well. The flowy bottom was flattering. The material is lightweight which was nice for the weather but also very thin so the colors of my bra showed through a bit. The color I got was Tahitian blue which is beautiful. I had a cute little vinyl Disney picture applied to the shirt with a heat press and it's held up well.

I ordered these shirts for a contractor customer. We applied his logo and he distributed the shirts among his crew. A few days after he picked up the shirts he stopped by to tell me that his crew members love the shirts. They are working all day outside and the shirts keep them nice and cool, they pull the sweat away from their skin and don't cling, No ugly sweat stains and very easy to get the dirt out during wash. A winner on all fronts!