gildan soft style

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

My customers love these!
I print using dye sublimation which requires 100% polyester for the best print. Polyester shirts come in two finishes and when my customers want the feel of cotton shirts, these are perfect!
I have not had a single complaint from a customer with these. And happy customers are what it's all about.

Use for HTV and they work great. Very soft and true to size. Make sure to tell customers that this shirt is NOT fitted. A few of my customers went down a size but majority say it fits true to size and perfectly. Just be sure they know it's not supposed to be a fitted top. I can wear a small or medium but I choose a medium for myself for a longer comfy fit.
Be sure to check these shirts... I have received several that have a messed up seam or are crooked. Jiffy has always been great about replacing them.
The shirts with darker colors for the shirt part are not quite as soft as the Heather gray shirts and aren't quite as loose of a fit (still true to size).

These are my go to Raglan for sublimation. Nice weight and the heather coloring is light enough to make colors bold but yet is not paler thin and see thru like some other brands...no undershirt required! Great selection of colors plus coordinating kids sizes available as well. Definitely mu favorite brand shirts

I use these shirts for Heat Transfer&apos;s and sell them. I love these tanks, I use them focusing on workout tanktops. They are lightweight and flowy. I love that they are a little longer so when I wear my tight workout pants, the shirt goes down over my butt and i feel comfortable that I am covered. (hope that helps)<br /><br />being (36D) I wear a large, I could probably go up a size to XL and be more comfortable.

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

OMGOODNESS! This was my 1st sub product of this magnitude and it turned out amazing. I have to remember to size down one size for the ladies next time, but other then that is was a hit.

I bought these to sublimate on. Every color fits just a tad bigger, but I would not size down if you like a loose fit. The athletic gray and light blue subs extremely well. I would not recommend subbing on the red, charcoal and California blue. The heat is too high for them and they tend to scorch. I turned the heat temp. down and it still scorched them and the image was faded.

Oh my gosh!! If you're looking for a SUPER soft, not tight in the mid section, thin but big too thin, flattering tank....thus should be your go-to! Sure, it's pricier than some but I would but this (and do) over any other tank! The sizing is true & could probably size 1 down too. I normally wear a large & the medium is perfect.

Oh, my favorite shirts by far, many colors, although some get backordered at times, favorite of customers, so many options

Absolute favorite for sublimation! Customers LOVE these.

Sizing. Needs to be in measurements so the label size can be ignored. I have 36 inch arms, 6 foot 2 inches tall, a 34 inch waist and weigh. 185 lbs Ordered 2XL for sleeve length. Big enough for two of me. Sleeves were good. Sent back, no problem. Ordered XL, better but not quite . Kept these and ordered LARGE. Received these and PERFECT! ! ACTUAL measurements should be included in description to avoid this.Love the shirts, lite, airy, looks good etc. The lower arms get sunburned easily and need to be protected, the long arms do this well.

Soft and very lightweight! They bleach and take sublimation very good. Purple turns pink then white. Black turns grey with some orange.

My customers love these shirts. I do embroidery on them, and while they are a bit thin, they hold up well. If for a lady, they run a tad big due to being unisex sized, so I have my customers order their actual size, not a size up, to still achieve a loose, non-clingy fit.

Fabulous for sublimation! Is quickly becoming a favorite. The sleeves are a little larger cut than the Tultex 202 and these do run a little large all the way around. I normally would wear XL in the 202 but in this one I would wear a large.

I decided to give these shirts a try for sublimation printing and they were a hit. Not only do they take the inks well, but they are super soft and feel like a comfortable cotton shirt. My son prefers them to cotton shirts now. My customers loved them as well. Definitely my go-to now for sublimation shirts.

Perfect shirt if you are looking for a slippery polyester activewear shirt. Does not shrink, keep moisture away. And worked really with vinyl application.

These shirts are excellent for screen printing. They hold up well in the wash, they keep their size & shape. The fit is great for a lot of different body types.

I purchased the white A4 performance shirt to make jerseys for a friend who is a coach of a basketball team. They were on a limited budget and I offered to take a shot at making them some. These shirts were exactly what we needed. They took the Siser HTV well at 290 degrees with no burn marks. The shirts have held up well and look great.